Tube Squaring machines

ULTIMASTER® - FACINGMASTER SE
 
The FACINGMASTER range of tube-squaring machines is ideal for preparing thin-walled tubes for welding. Machines for facing, beveling and counterboring tubes
 



FACINGMASTER SE-2T

tube-squaring machine for tubes, fittings, micro-fittings, elbows and tees.

Portable, very lightweight, multifunctional tube-squaring machine. For thin-walled tubes, fittings, micro-fittings, elbows and tees. The SE-2T tube-squaring machine is designed for machining tubes with a diameter of 3 to 60.3 mm (0.1“– 2.3“). It is clamped around the tube by means of clamping collets. Tubes, fittings, micro-fittings, elbows and tees are not deformed in any way whatsoever. No heat-affected zones! No burrs! The SE-2T machine can be driven either by battery or from the mains. It can be bench-mounted. The SE-2T squaring machine is the ideal complement for your orbital welding operations. It is ideal for preparing welding operations.



FACINGMASTER SE25

squaring machine for tubes, fittings, micro-fittings, elbows and tees

Portable, compact, lightweight and easy-to-use, the SE-25 machines is designed for squaring and/or beveling thin-wall tubing. Clamping is done on the outside diameter of the tube by means of a collet. A different collet is required for each diameter. No deformation or damage to tubes! No heat-affected zone No burrs! Battery or mains powered. Can be bench-mounted. The SE-25 is the essential complement to your orbital welding machines and is designed for preparing tubes perfectly for welding operations.



FACINGMASTER SE65

squaring machine for tubes, fittings, micro-fittings, elbows and tees

Portable, compact, lightweight and easy-to-use, the SE-65 machines is designed for squaring and/or beveling thin wall tubing. Clamping is done on the outside diameter of the tube by means of a collet. A different collet is required for each diameter No deformation or damage to tubes! No heat-affected zone. No burrs! Battery or mains powered. Can be bench-mounted



ULTIMASTER® - FACINGMASTER SE
 
The FACINGMASTER range of tube-squaring machines is ideal for preparing thin-walled tubes for welding. Machines for facing, beveling and counterboring tubes
 



MASTERLINE SL-30

Tube machining units for tubes, fittings, micro-fittings, elbows and tees.

For tube ODs from 13 to 63.5 mm (0.512" / 2.5")

Portable, compact, lightweight and easy-to-use, the MASTERLINE SL range of machines is designed for squaring and/or beveling thin-wall tubing. Tubes are clamped on the outside by means of a collet, which means that they are held in position perfectly concentrically.

With machines from the MASTERLINE SL range, you will prepare your tubes perfectly for welding and benefit from considerable time-savings:

Rapid collet and clamping head changing
Small sized unit specially designed for accessing narrow tube bundles
Consistent quality in machining
No burrs in machining
No heat-affected zones
No deformation on tubes, connections, micro-connections or elbows with the collet clamping system
A machine that can also be bench-mounted
A powerful machine with its 1050W motor.



MASTERLINE SL-60

Tube machining units for tubes, fittings, micro-fittings, elbows and tees

For tube ODs from 13 to 63.5 mm (0.512" / 2.5")

Portable, compact, lightweight and easy-to-use, the MASTERLINE SL range of machines is designed for squaring and/or beveling thin-wall tubing. Tubes are clamped on the outside by means of a collet, which means that they are held in position perfectly concentrically.

With machines from the MASTERLINE SL range, you will prepare your tubes perfectly for welding and benefit from considerable time-savings:

Rapid collet and clamping head changing
Small sized unit specially designed for accessing narrow tube bundles
Consistent quality in machining
No burrs in machining
No heat-affected zones
No deformation on tubes, connections, micro-connections or elbows with the collet clamping system
A machine that can also be bench-mounted
A powerful machine with its 1050W motor.



MASTERLINE SL-120

Tube machining units for tubes, fittings, micro-fittings, elbows and tees

For tube ODs from 50 to 120 mm (1.9" / 4.7")

Portable, compact, lightweight and easy-to-use, the MASTERLINE SL range of machines is designed for squaring and/or beveling thin-wall tubing. Tubes are clamped on the outside by means of a collet, which means that they are held in position perfectly concentrically.

With machines from the MASTERLINE SL range, you will prepare your tubes perfectly for welding and benefit from considerable time-savings:

Rapid collet and clamping head changing
Small sized unit specially designed for accessing narrow tube bundles
Consistent quality in machining
No burrs in machining
No heat-affected zones
No deformation on tubes, connections, micro-connections or elbows with the collet clamping system
A machine that can also be bench-mounted
A powerful machine with its 1050W motor.


 

ULTIMASTER® - ULTIMATE FACING MASTER

Discover our range of OD clamping machines, perfectly suited for tube-machining operations such as beveling (I, V, U, X, etc.) squaring, and counter-boring simultaneously or separately:

Portable, compact and light in weight, ULTIMATE FACING MASTER machines cover, ranges, depending on models, from 10 to 219 mm (0.3937" - 8.622").

Do not hesitate in consulting us if the tubes you need to machine are larger than the diameters mentioned above UFM machines are suitable for all types of steel: Stainless and carbon steels, exotic steels, titanium, zirconium, austenite, inconel, duplex, super duplex, aluminum, copper, etc.






Tool-holders are easy and quick to change. Tool insert are reversible

Perpendicular cut
Automatic centering onto the pipe
Perfect concentric clamping
Burr-free cut

On request, the UFM 60 can be fitted with the following systems:

Automatic tube clamping
Automatic feed
Limit switches
Remote control
Special clamping for elbows or connections
Bench-fitting

The UFM is used for machining both thin and thick-walled tubes.

Applications for ULTIMATE FACING MASTER machines:

Tube-beveling on boiler panels
Cutting tubes to length
Cutting boiler-panel tubes (finned tubes) to length
Machining electro-polished tubes
Preparing for orbital welding Etc.

Models available in the ULTIMATE FACING MASTER range:

ULTIMATE FACING MASTER UFM-90

Capacity: 25 mm-90 mm (0.9843" - 3.5433")

Perpendicular cut
Automatic centering onto the pipe
Perfect concentric clamping
Burr-free cut

ULTIMATE FACING MASTER UFM-120

Capacity: 60 mm-120 mm (2.3622" - 4.7244")

No Vibration, No heat-affected zone
Excellent preparation for mechanised welding processes Rigidity, ergonomic design, flexibility, reliability

ULTIMATE FACING MASTER UFM-219

Capacity: 60.3 mm-219 mm (2.374" - 8.622")

Suitable for all types of steel:
mild steel, stainless steel, duplex,
super duplex, inconel, hastelloy,
aluminium, copper, titanium etc.



 

SUBSCRIBE TO OUR NEWSLETTER